Vertiv MSC-A7S852BSNNX1 5kVA UPS SmartCabinet 29U Rack

• Compact IT Infrastructure Deployment: Integrate rack space, UPS, cooling and power distribution within the listed cabinet configuration.
• Branch Office IT Equipment: Evaluate the cabinet for branch infrastructure where its rack capacity and electrical requirements are suitable.
• Enterprise Equipment Consolidation: Use the 29U usable space to plan installation of compatible IT equipment.
• Server and Network Rack Deployment: Consider for rack-mounted IT equipment that fits the usable space and power requirements.
• UPS-Protected IT Installation: Use the integrated 5kVA Liebert ITA2 UPS as part of the cabinet's power configuration.
• Temperature-Controlled Equipment Housing: Evaluate the 900W–3500W cooling range against the intended IT load.
• Outdoor-Condenser Cooling Deployment: Plan installations that can accommodate the listed outdoor condenser arrangement.
• Distributed IT Infrastructure: Assess for remote or distributed locations where the required site power, cooling and servicing arrangements are available.
• Multiple Equipment Power Connections: Use the two listed PDUs for equipment requiring compatible C13 or C19 power outlets.
• Centralized Infrastructure Monitoring: Monitor the listed UPS, cooling and PDU subsystems through the centralized management feature.
• Water-Leak Monitoring: Use the included water-leak detector in the intended monitored installation area.
• Controlled Cabinet Access: Use the smart-lock door system for installations requiring the listed electronic locking feature.
• Front and Rear Service Access: Use the front and rear LED lighting when accessing the cabinet from either side.
• Single-Phase Power Installations: Evaluate for sites that meet the stated 50A, single-phase, 220/230/240V AC input requirements.
• IT Equipment Enclosure: Use the fully enclosed rack design for compatible equipment that meets the cabinet's space, power and cooling limits.

• Usable Rack Space: Provides 29U of usable IT rack space — helps buyers plan equipment installation within the available rack capacity.
• Enclosed Rack Design: Uses a fully enclosed containment design — provides an enclosed structure for installed IT equipment.
• Integrated UPS: Includes a 5kVA Liebert ITA2 UPS with a power factor of 1.0 — supports evaluation of the cabinet's stated power-protection configuration.
• Variable-Speed Cooling: Provides cooling capacity from 900W to 3500W — allows cooling capacity to vary according to system requirements.
• Outdoor Condenser: Uses an outdoor condenser unit — supports the listed split-cooling configuration.
• Centralized Monitoring: Supports centralized monitoring and management of UPS, cooling and PDUs — brings the listed infrastructure subsystems into a shared management arrangement.
• LCD Touchscreen: Includes a 9-inch LCD touchscreen — provides a local display and touch interface.
• Power Distribution: Includes two PDUs with 32A input, 18 C13 outlets and 6 C19 outlets each — provides specified outlet types for connected equipment.
• Front and Rear Lighting: Includes front and rear LED lighting — provides lighting at both cabinet access sides.
• Smart Door Locks: Uses smart locks on the tempered-glass door — provides the listed electronic access-control feature.
• Water-Leak Detection: Includes one water-leak detector with a 5-metre cable — supports detection of water leaks in the monitored installation area.
• Emergency Fan: Includes an emergency fan — provides an additional listed ventilation component.
• Wide Input Voltage Range: Supports 220V, 230V or 240V AC input at 50Hz or 60Hz — helps buyers verify the stated electrical requirements.
• R410A Refrigerant: Specifies R410A refrigerant for the cooling system — identifies the listed refrigerant for installation planning.
• Black Finish: Listed in black — identifies the cabinet's supplied colour.

• Brand: Vertiv
• Model / Product Code: 01230284
• Product Identifier: MSC-A7S852BSNNX1
• Product Type: Integrated SmartCabinet
• Product Category: Enclosed IT rack and micro data center infrastructure
• Colour: Black
• Rack Design: Fully enclosed containment
• Total Rack Height: 42U, as identified in the supplied product information
• Usable IT Rack Space: 29U
• UPS Model: Liebert ITA2
• UPS Capacity: 5kVA
• UPS Power Factor: 1.0
• Cooling Capacity: 900W–3500W
• Cooling Control: Variable speed
• Condenser Location: Outdoor
• Refrigerant: R410A
• System Input Current: 50A
• System Input Phase: Single-phase
• System Input Voltage: 220/230/240V AC
• System Frequency: 50Hz and 60Hz
• Power Distribution Units: 2
• PDU Input Rating: 32A
• PDU Outlets: 18 × C13 and 6 × C19 per PDU
• Display Panel: 9-inch LCD touchscreen
• Lighting: Front and rear LED lighting
• Door Lock System: Smart lock
• Door Type: Tempered glass
• Water-Leak Detection: 1 detector with a 5-metre cable
• Emergency Fan: Yes
• Centralized Monitoring: UPS, cooling and PDU
• Noise Level: =50dB, excluding the outdoor condenser
• Cooling High Availability: No
• Ingress / EMC Standards Listed: EN 55022:2010 and EN 61000-3-11:2000
• Warranty: 1 year

WHY CHOOSE THIS PRODUCT?

• Integrated Infrastructure: Combines rack space, UPS, cooling and power distribution in one listed cabinet configuration.
• Defined IT Capacity: The 29U usable rack space helps procurement teams plan equipment installation.
• UPS Capacity: The included 5kVA Liebert ITA2 UPS provides a defined power-capacity specification for system planning.
• Variable Cooling Range: The 900W–3500W cooling range helps buyers compare cooling capacity with their planned IT load.
• Centralized Management: Monitoring covers the UPS, cooling and PDUs, supporting oversight of these listed subsystems.
• Multiple Outlet Types: The two PDUs provide C13 and C19 outlets for equipment with matching power connections.
• Local Touchscreen: The 9-inch LCD touchscreen provides a local interface for the cabinet system.
• Environmental Monitoring: The included water-leak detector supports water-leak detection in the monitored area.
• Access Control: Smart locks on the tempered-glass door provide the listed door-lock feature.
• Electrical Planning: The specified voltage, current, phase and frequency requirements help buyers check site power suitability.
• Cooling Installation Planning: The outdoor condenser arrangement and R410A refrigerant details support review of cooling installation requirements.
• Warranty Coverage: The supplied listing states a 1-year warranty for procurement evaluation.