Enquire: Asia & Africa - +65-98008081 USA - +1-919-995-4114

Home Networking Servers & Storage StarTech.com SATSASBP425 4-Bay 2.5 Inch SATA/SAS Hot-Swap Backplane

StarTech.com SATSASBP425 4-Bay 2.5 Inch SATA/SAS Hot-Swap Backplane

Brand:

StarTech.com SATSASBP425 is a four-bay mobile rack backplane that installs up to four 2.5-inch SATA or SAS HDDs/SSDs into a single 5.25-inch drive bay. Designed for servers, workstations and storage builds, it combines hot-swap drive access, lockable removable trays, dual 40mm cooling fans and a durable aluminum housing. Support for SATA III and SAS II enables transfer rates up to 6 Gbps with a compatible controller, while interchangeable trays simplify recurring drive replacement and backup workflows.

OVERVIEW

  • StarTech.com SATSASBP425 converts one available 5.25-inch bay into four removable 2.5-inch SATA/SAS drive bays, giving IT teams higher storage density and faster drive servicing. Compatibility: requires a 5.25-inch bay, four SATA/SAS host ports and suitable power connections. Compared with SATSASBP125: this model accommodates four drives instead of one. Requirement: compatible controller, drives and chassis airflow. 

USE CASES

  • Add four 2.5-inch drives to a server with limited drive bays
  • Build compact SATA/SAS storage arrays
  • Expand workstation storage capacity
  • Create RAID storage with a compatible controller
  • Replace drives without opening the computer chassis
  • Support frequent drive exchange and maintenance
  • Build rotating backup-drive workflows
  • Consolidate multiple 2.5-inch drives into one 5.25-inch bay
  • Upgrade systems requiring removable SATA/SAS storage
  • Image multiple 2.5-inch drives in system-building environments

KEY FEATURES

  • Four 2.5-inch SATA/SAS bays - Adds four removable drives within a single 5.25-inch bay, increasing storage density without consuming multiple front-panel bays.
  • SATA III and SAS II support - Supports transfer rates up to 6 Gbps when paired with compatible drives and controllers, providing a practical interface for high-speed storage deployments. 
  • Hot-swap capability - Allows compatible drives to be replaced or exchanged without shutting down the host system, reducing maintenance interruption. 
  • 5–15 mm drive-height support - Accommodates a broad range of 2.5-inch HDDs and SSDs, improving component-selection flexibility. 
  • Lockable removable trays - Helps prevent unintended drive removal while providing convenient access for authorized maintenance.
  • 50,000+ insertion rating - The NSS connectors are designed for frequent drive insertion and removal, supporting long-term operational use. 
  • Two 40mm cooling fans - Improves airflow around installed drives to help manage operating temperatures in dense storage configurations.
  • Aluminum housing - Provides a durable enclosure with enhanced heat dissipation for installed storage devices. 
  • Vertical or horizontal mounting - Provides installation flexibility where chassis layout or drive orientation varies. 
  • Individual drive LEDs - Provides power and activity visibility for each installed drive, simplifying status checks during maintenance.
  • Interchangeable drive trays - Trays can also be used with the StarTech.com SATSASBP125 single-bay backplane, supporting a more flexible spare-drive strategy.

TECHNICAL SPECIFICATIONS

  • Brand: StarTech.com
  • Model / Product ID: SATSASBP425
  • Product Type: 4-Bay Mobile Rack Backplane
  • Drive Bays: 4
  • Drive Form Factor: 2.5-inch
  • Compatible Drive Types: SATA & SAS HDD/SSD
  • Supported Drive Heights: 5 mm, 9.5 mm, 12.5 mm, 15 mm
  • Host Interface: 4 × SATA 7-pin data
  • Drive Connectors: 4 × SATA 7+15-pin data/power combo
  • Power Connector: 1 × LP4 / Molex, 4-pin
  • Maximum Data Transfer Rate: 6 Gbps
  • SATA Standard: SATA III, 6 Gbps
  • SAS Standard: SAS II
  • Hot Swap: Yes
  • Port Multiplier: No
  • Maximum Tested Drive Capacity: Up to 2 TB at 7200 RPM
  • Insertion Rating: 50,000 cycles
  • MTBF: 30,000 hours
  • Fans: 2 × 40 mm
  • Fan Bearing: Sleeve bearing
  • Airflow: Not specified by StarTech for this model
  • Noise Level: 20 dBA
  • Drive LEDs: 4 × drive power/activity LEDs
  • Fan LED: 1 × fan activity LED
  • Front Door Lock: Yes
  • Installation: Removable drive trays
  • Mounting Orientation: Vertical or horizontal
  • Housing Material: Aluminum
  • Operating Temperature: Not specified in current product listing
  • Storage Temperature: -20°C to 55°C
  • Relative Humidity: 5%–65%
  • Product Length: 6.9 in / 17.5 cm

Why Choose This Product?

  • Four drives in one 5.25-inch bay - Maximizes usable storage density where chassis bay availability is limited.
  • Hot-swap maintenance - Reduces downtime associated with replacing compatible storage drives.
  • SATA and SAS flexibility - Lets infrastructure teams select between supported SATA and SAS storage technologies according to workload and controller architecture.
  • Frequent-service durability - The 50,000+ insertion-rated NSS connectors are suited to environments where drives are repeatedly exchanged. 
  • Better drive protection - Lockable trays help prevent accidental or unauthorized physical drive removal.
  • Thermal management - Dual 40mm fans and aluminum construction support airflow and heat dissipation around densely installed drives.
  • RAID-ready architecture - Works with compatible RAID controllers, enabling storage configurations designed around redundancy or performance requirements.
  • Procurement flexibility - Supports 5–15 mm 2.5-inch SATA/SAS HDDs and SSDs, widening the range of compatible storage components.

CUSTOMER REVIEW

No Reviews Found

FAQ

No FAQs Found