Enquire: Asia & Africa - +65-98008081 USA - +1-919-995-4114

Home Networking Networking Cards StarTech.com 1-Port 10GbE PCIe Network Card

StarTech.com 1-Port 10GbE PCIe Network Card

Brand:

The StarTech.com ST10000SPEXI is a 1-port PCIe 10GbE network interface card built with the Intel X550-AT chipset for servers, high-performance workstations and desktop computers. It adds 10GBase-T/NBASE-T RJ-45 connectivity with automatic support for 10Gbps, 5Gbps, 2.5Gbps, 1Gbps and 100Mbps networks. PCIe x4 connectivity, 9K jumbo frames, VLAN tagging, PXE boot, Intel VT-c and dual-profile installation make it suitable for bandwidth-intensive infrastructure upgrades without replacing the host system.

View Ratings :  

OVERVIEW

  • The ST10000SPEXI is a single-port PCIe 10GbE copper NIC for servers, workstations and desktops needing higher network bandwidth. Compatibility: PCIe x4 or higher; Windows, Windows Server, Linux and VMware ESXi. Compared with 1GbE NICs, it adds 10Gbps and NBASE-T speeds while retaining 1Gbps/100Mbps compatibility. Its Intel X550-AT controller and RJ-45 interface support infrastructure upgrades using existing copper cabling where supported. 

USE CASES

  • High-performance server networking: Adds 10GbE bandwidth to application, database and file servers handling large volumes of network traffic.
  • Storage and backup infrastructure: Provides higher-speed Ethernet connectivity for compatible network storage, backup and large-file transfer environments.
  • Virtualized server deployments: Intel Virtualization Technology for Connectivity helps integrate the NIC into compatible virtualized networking environments.
  • High-bandwidth workstations: Enables faster access to shared storage, large project files and network-based applications on compatible professional workstations.
  • 10GbE infrastructure migration: Provides a practical NIC-level upgrade for systems moving from 1GbE toward 10GbE without replacing the entire server or workstation.
  • NBASE-T network environments: Supports 5Gbps and 2.5Gbps connections, allowing compatible infrastructure to operate at intermediate multi-gigabit speeds.
  • Legacy copper infrastructure upgrades: 5Gbps and 2.5Gbps NBASE-T operation can use compatible existing Cat5e infrastructure, while 10Gbps operation requires Cat6a cabling. 
  • PXE-based provisioning: Supports network boot workflows where the system firmware, network environment and deployment software provide PXE functionality.
  • Network segmentation: IEEE 802.1Q VLAN tagging enables supported systems to participate in segmented network architectures.
  • Mission-critical connectivity: StarTech.com identifies the card for high-demand database servers and systems requiring additional network connectivity.

KEY FEATURES

  • 10GbE RJ-45 connectivity: Adds a 10GbE copper network port to a compatible server, workstation or desktop, increasing available network bandwidth.
  • Intel X550-AT chipset: Provides an Intel-based 10GbE controller platform with advanced networking capabilities for demanding infrastructure applications.
  • Five network speeds: Supports 10Gbps, 5Gbps, 2.5Gbps, 1Gbps and 100Mbps, allowing the NIC to negotiate with compatible multi-speed network equipment. 
  • Up to 20Gbps full-duplex bandwidth: Supports up to 10Gbps in each direction, giving high-throughput systems greater simultaneous transmit and receive capacity.
  • PCI Express x4 interface: Uses a four-lane PCIe connection, providing the host interface required for 10GbE network performance.
  • 10GBase-T and NBASE-T: Supports standards-based copper networking and multi-gigabit connectivity for more flexible infrastructure migration.
  • Intel VT-c support: Provides Intel Virtualization Technology for Connectivity for compatible virtualization deployments.
  • 9K jumbo frames: Supports larger Ethernet frames to reduce packet overhead in appropriately configured networks.
  • IEEE 802.1Q VLAN tagging: Enables VLAN-based network segmentation on compatible operating systems and network infrastructure.
  • PXE network boot: Supports network-based system provisioning where the host firmware and deployment environment support PXE.
  • Auto-MDIX: Automatically accommodates compatible Ethernet cable wiring, simplifying network installation.
  • Full-duplex operation: Supports simultaneous transmission and reception for efficient bidirectional network traffic.
  • AVB support: Supports Audio-Video Bridging capabilities for compatible time-sensitive media networking applications.
  • Dual-profile installation: Includes both a standard-profile configuration and low-profile bracket, expanding compatibility with different server and workstation chassis.
  • Connectivity Tools: StarTech.com provides supported utilities including MAC Address Pass-Through and Wi-Fi Auto Switch functions for applicable environments.

TECHNICAL SPECIFICATIONS

  • Brand: StarTech.com
  • Product ID / SKU: ST10000SPEXI
  • Product Type: PCI Express 10 Gigabit Ethernet Network Card
  • Port Count: 1
  • Network Connector: RJ-45
  • Network Interface: 10 Gigabit Ethernet
  • Host Interface: PCI Express x4
  • PCIe Version: PCI Express Rev. 2.0
  • Maximum Data Transfer Rate: 10Gbps
  • Full-Duplex Bandwidth: Up to 20Gbps total
  • Supported Network Speeds: 10Gbps / 5Gbps / 2.5Gbps / 1Gbps / 100Mbps
  • Networking Technology: 10GBase-T / NBASE-T
  • Chipset: Intel X550-AT
  • Jumbo Frames: Up to 9K
  • VLAN: IEEE 802.1Q
  • Flow Control: IEEE 802.3x
  • PXE Boot: Yes
  • Wake-on-LAN: Not listed as a specification for this model
  • Auto-MDIX: Yes
  • Full Duplex: Yes
  • Promiscuous Mode: Yes
  • Virtualization: Intel VT-c
  • AVB: Supported
  • Industry Standards: IEEE 802.3an, IEEE 802.3ab, IEEE 802.3u, NBASE-T
  • 10G Cabling: Cat6a required for 10Gbps
  • 5G / 2.5G Cabling: Compatible Cat5e infrastructure supported
  • Compatibility: PCIe x4 or higher; supported Windows, Windows Server, Linux and ESXi systems
  • Card Profile: Standard profile; low-profile bracket included
  • LED Indicators: Link/Activity; 10G/1G Speed
  • Input Voltage: 12V DC
  • Cable Length: 100mm / 3.9in
  • Material: Steel
  • Color: Black
  • Product Length: 15.2cm / 6.0in
  • Product Width: 68.5mm / 2.7in
  • Product Height: 12.1cm / 4.8in
  • Product Weight: 96g / 3.4oz
  • Operating Temperature: 5°C to 50°C
  • Storage Temperature: -20°C to 60°C

Why Choose This Product?

  • 10GbE performance without a platform replacement: Adds high-speed Ethernet to an existing compatible PCIe system, potentially extending the useful life of servers and workstations.
  • Flexible migration path: Support for 10Gbps, 5Gbps, 2.5Gbps, 1Gbps and 100Mbps lets the NIC work across multiple network generations. 
  • Copper infrastructure advantage: 10GbE uses RJ-45 connectivity, while 5Gbps and 2.5Gbps operation can use compatible Cat5e infrastructure, helping organizations phase network upgrades.
  • Designed for bandwidth-intensive workloads: 10GbE is suited to large file transfers, high-demand database systems, network storage and other applications where 1GbE can become a throughput constraint.
  • Server-oriented networking functions: VLAN tagging, jumbo frames, PXE boot and Intel VT-c provide capabilities beyond basic Ethernet connectivity.
  • Broad chassis deployment: The included low-profile bracket gives IT teams greater flexibility when installing the NIC in different compatible server and workstation form factors.
  • Infrastructure standardization: One multi-speed NIC can accommodate different switch and cabling environments, reducing the need to deploy separate adapters for every Ethernet speed tier.
  • Vendor-backed lifecycle support: StarTech.com provides a 2-year warranty and lifetime technical support for the ST10000SPEXI. 

CUSTOMER REVIEW

"We selected the StarTech.com 1-Port 10GbE PCIe Network Card for a workstation handling large file transfers and shared storage. The RJ-45 connection, PCIe x4 interface and included low-profile bracket made it a practical option for our hardware setup."

Nicolas

FAQ

No FAQs Found