Enquire: Asia & Africa - +65-98008081 USA - +1-919-995-4114

Home Networking Network Adapter Lutron RRK-R25NE-240 Select In-line Wireless Dimmer Switch (Black)

Lutron RRK-R25NE-240 Select In-line Wireless Dimmer Switch (Black)


Brand:

Specifications

       Product details:
  • 100% brand new from factory and high quality
  • Economical Price
  • Sold and shipped from Singapore (hence faster delivery, Easy to Exchange)
  • 1 Year Warranty
  • Brand: Lutron 
  • Model: RRK-R25NE-240
  • UPC Code: 0784276251389

    FEATURES
  • The Reverse-phase Dimmer Is Trailing-edge Capable Of Up To 250 W Of Incandescent/halogen/ Elv Loads And Up To 1 A / 150 W Of Led.
  • The Switch Is Rated For 6 Ax Of General-purpose Lighting Load And 2 A 0.5 Hp Of Motor Load.
  • Allows Remote Control From Anywhere In The Space When Paired With Pico Wireless Controls.
  • When Used With The Ra2 Select Main Repeater, The Load Controls Can Be Programmed Via The Lutron App* To Incorporate Lighting Scenes And Schedule
  • Daily Events. Also, The Load Controls Can Also Be Controlled From Anywhere In The World.
  • To Maximize Energy Savings And Provide Hands-free Operation, Load Controls Can Be Turned On / Off Automatically Via Radio Power Save
  • Occupancy /vacancy Sensors.
  • Small Size Allows For Simple Retrofit Installation.
  • Remote Device Association Allows For In-line Controls To Be Added To A System Without Physically Accessing The Product.
  • The Lutron App Is Required For Setup And Use With The Ra2 Select Main Repeater. The Lutron App Is Compatible With Iosr Devices Version
  • 8.0 Or Later And Android Devices Version 4.0 Or Later.standing Desk

    SPECIFICATIONS
  • Power: 20–240 V-50/60 Hz 
  • Typical Power Consumption Dimmer/ Switch: < 0.5 W . 
  • Test conditions: Load and LED are off
  • Regulatory Approvals CE (RRK model only) IDMA (RRM model only) WPC (RRN model only) 
  • Environment Ambient operating temperature: 0 DegreeC to 40 DegreeC (32 DegreeF to 104 DegreeF), 0% to 90% humidity, non-condensing. Indoor use only. 
  • Communications RA2 Select in-line load controls communicate with the system through Radio Frequency (RF). 
  • They must be located within 18 m (60 ft) line-of-sight or 9 m (30 ft) through walls of a Pico wireless control, Radio Powr Savr sensor, or RA2 Select repeater. 
  • System devices operate at 868 MHz, 868 MHz Limited, 865 MHz or 434 MHz Limited frequencies. 
  • ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. 
  • Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 
  • Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits. 
  • Power Failure Memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.
  • Mounting Allow adequate space to ensure convective cooling of load control. 
  • Remove any insulation, heat-generating equipment, or obstructions within 120 mm (4.75 in) of the load control. 
  • For optimal RF performance, no metal or other electrically conductive material should be present within 120 mm (4.75 in) around the top and sides of the load control. 
  • The load control is not suitable for installation in places where it is fully enclosed in metal (e.g., metal enclosures, electrical cabinets) or within metal ceilings. 
  • Wiring RA2 Select in-line controls to accept wire gauges between 0.5 mm2 to 2.5 mm2 (20 AWG to 14 AWG). 

Features

Brand:
Lutron
Color:
Black
Conditions:
New
GTIN, UPC, EAN, JAN or ISBN:
0784276251389
Warranty:
1 Year