Enquire: Asia & Africa - +65-98008081 USA - +1-919-995-4114

Home Fiber Optic Cables Accessories Fiber Attenuators Hot LC/UPC 10dB Fixed Fiber Optic Attenuator Singlemode | For Data Centers & Telecom Networks (Blue)

LC/UPC 10dB Fixed Fiber Optic Attenuator Singlemode | For Data Centers & Telecom Networks (Blue)


Brand:
No Brand

Specifications

   Description
  • The LC/UPC Fixed Attenuator 10dB is an inline optical device designed to provide a fixed attenuation of 10 decibels in single-mode fiber optic systems. It’s used to reduce optical power levels, protecting receivers or balancing signal strength.
   Specifications
  • Connector Type: LC connector with UPC (Ultra Physical Contact) polish
  • Attenuation: Fixed 10 dB (±0.5 dB typical tolerance)
  • Fiber Type: Single-mode (9/125 µm)
  • Wavelength Range: 1260 nm to 1620 nm (optimized for 1310 nm and 1550 nm telecom wavelengths)
  • Return Loss: Typically =50 dB (UPC polish offers good but not the lowest back reflection)
  • Polarization Dependent Loss (PDL): <0.2 dB
  • Maximum Input Power: Up to +23 dBm (~200 mW)
  • Operating Temperature: –40°C to +80°C
   Features
  • Fixed 10 dB attenuation: Precise, stable reduction in optical signal power
  • UPC polish connectors: Good return loss and physical contact, suited for general telecom and data applications
  • Compact and easy to use: Plug-and-play insertion between LC patch cables and optical equipment
  • High durability: Zirconia ferrules and industry-standard construction
  • Broad wavelength support: Works well across standard telecom bands
   Ideal Use Cases
  • Power level adjustment: When optical power is too high for receivers or sensitive components
  • General telecom and enterprise networks: Suitable where ultra-low back reflection is not critical
  • Lab testing and system calibration: Ensuring consistent attenuation during measurements
  • Fiber patch panels and infrastructure: Balancing signal power across complex fiber networks
   Why Choose LC/UPC Fixed Attenuator 10dB?
  • Consistent and reliable attenuation: Factory-calibrated to ±0.5 dB tolerance for predictable performance.
  • Good return loss for most applications: UPC polish provides a balance of low back reflection and cost.
  • Easy deployment: No special tools or setup needed; simply plug inline.
  • Cost-effective: Less expensive than APC polished attenuators, ideal for standard network environments.
  • Suitable for most single-mode systems: Widely compatible with telecom and data equipment.

Features

Brand:
No Brand
Conditions:
New
Warranty:
No Warranty