Enquire: Asia & Africa - +65-98008081 USA - +1-919-995-4114

Home WDM, OTN & PON Open Line System Chassis & Accessories FS 1+1 D7000 OPB2 Optical Protection Switch for D7000 Managed Chassis (White)

FS 1+1 D7000 OPB2 Optical Protection Switch for D7000 Managed Chassis (White)


Brand:
FS

Specifications

   Product details:
  • 3 Years Warranty
  • Brand: FS
  • Model: D7000 OPB2
   Description:
  • D7000 Series OPB2 provides 1+1 Protection for Single Optical Line and supports two threshold modes and two working modes. When the loss of the working fiber increases or the working fiber is blocked, the optical communication transmission system is automatically switched from the main line to the backup line in real time. The OPB2 enhances the robustness of optical networks by offering real-time failover from a compromised main line to a pre-established backup line, ensuring uninterrupted data flow and network service continuity, which is essential for maintaining high-quality communications and safeguarding against costly downtime.
  • The D7000 series is a 200G/400G stackable wavelength division transmission platform featuring large transmission capacity, small size, low power consumption, and easy operation and maintenance. The D7000 supports AmpCon™-T/WebGUI/CLI management, which provides comprehensive management capabilities to enhance data security and operational efficiency and can be widely used in DCI, metro, regional and long-haul networks.
   Features:
  • Support Manual Switching and Automatic Switching
  • Support Auto and Non-auto Reversion Working Modes
  • Support Relative and Absolute Threshold Modes
  • Switching Speed is Lower than 50ms, Ultra-fast Recovery
   Specifications:
  • Return Loss: > 45 dB, indicating minimal back reflection of light.
  • Switching Speed: < 50 ms (typical 15 ms), a fast switching time, indicating the switch responds quickly to control signals.
  • Input Power Range: -30 to +25 dBm, the range of power levels that can be input into the device.
  • Power Resolution: 0.1 dB (typical), the precision of power measurement.
  • Power Accuracy: -0.5 to +0.5 dB, the acceptable error in power measurement.
  • Polarization Dependent Loss: 0.1 dB, showing low dependence on the polarization of the light signal.
  • Polarization Mode Dispersion: < 1 ps/nm, indicating minimal distortion due to different polarization modes in the fiber.
  • Power Consumption: 5W, which is a typical low power consumption for this type of device.
  • Optical Connector: LC/UPC (a type of fiber optic connector, common in telecom systems).
  • Switch Type: Latching, meaning it stays in its last position until a new control signal is sent.
  • Housing and Module: Pluggable Module, fits into a 1-slot position in the D7000-CH2U Chassis.
   Losses:
  • Wavelength Dependent Loss: < 0.5 dB across both C+L Bands, which indicates low signal degradation over the wavelength range.
   Insertion Loss:
  • Tx (Transmission): < 4.0 dB (typical 3.5 dB)
  • Rx (Reception): < 1.5 dB (typical 0.8 dB)
  • This refers to the loss of signal when the switch is in operation, with Tx loss indicating transmission and Rx loss indicating reception.
   Dimensions & Weight: 
  • Size: 1.67" x 4.20" x 10.39" (42.3 x 106.8 x 264 mm), which indicates the physical size of the module.
  • Weight: 0.77 kg.
   Operating and Storage Temperatures:
  • Operating Temperature: 0 to 45°C (32 to 113°F).
  • Storage Temperature: -40 to 85°C (-40 to 185°F).
   Modes:
   Working Mode:

  • Auto Reversion
  • Auto Non-reversion
  • Threshold Modes:
  • Relative Threshold
  • Absolute Threshold
  • These refer to how the switch operates under varying conditions of signal strength or control.


Features

Brand:
FS
Color:
White
Conditions:
New
Warranty:
3 Years